EWS.EW.EWF model

The spring balancers employ a taper drum to make the changeable torque constant and contribute to fatigue reduction for worker on the production line.

Model Capacity(kg) Cable travel(m) EWS-3 1.5 - 3.0 1.3 EWS-5 3.0 - 5.0 EWS-7 5.0 - 7.0 EW-3 1.0 - 3.0 EW-5 2.5 - 5.0 EWF-9 4.5 - 9.0 EWF-15 9.0 - 15.0 EWF-22 15.0 - 22.0 1.5 EWF-30 22.0 - 30.0 EWF-40 30.0 - 40.0 EWF-50 40.0 - 50.0 EWF-60 50.0 - 60.0 EWF-70 60.0 - 70.0 EWF-90 70.0 - 90.0 2.0 EWF-105 85.0 -105.0 EWF-120 100.0 - 120.0

Long stroke model

	NEW model	NEW model

	These models are capable of 2.5 m stroke and have advantage of which workers can arrange the spring tension without using a ladder. Further these have a drum lock mechanism.
	Model Capacity(kg) Cable travel(m) ELF-3 1.5 - 3.0 2.5 ELF-5 3.0 - 5.0 ELF-9 5.0 - 9.0 ELF-15 9.0 - 15.0 ELF-22 15.0 - 22.0 ELF-30 22.0 - 30.0 ELF-40 30.0 -40.0 ELF-50 40.0 - 50.0 ELF-60 50.0 - 60.0 ELF-70 60.0 - 70.0

---

RSBmodel

With a ratchet

 

 

	They are convenient to make a suspended tool on and off. Further they are suitable for frequent load change.
	Model Capacity(kg) Cable travel(m) RSB-15 9.0 - 15.0 1.5 RSB-22 15.0 - 22.0 RSB-30 22.0 - 30.0 RSB-40 30.0 - 40.0

---

EWF.ETP model

 

 

	From 70kg to 200kg They are suitable for such the large equipment as a nut runner, grinder etc.
	Model Capacity(kg) Cable travel(m) EWF-90 70.0 - 90.0 2.0 EWF-105 85.0 - 105.0 EWF-120 100.0 - 120.0 ETP-14 120.0 - 140.0 1.2 ETP-15 140.0 - 170.0 ETP-16 170.0 - 200.0

	It is convenient for suspending an electric driver.
	Model Capacity(kg) Cable travel(m) EK-00 0.5 - 1.5 0.5 EK-0 1.0 ERP-06E 0.3 - 0.6 1.5 ERP-1E 0.5 - 1.0 1.5 ERP-2E 1.0 - 2.0 1.5

	This is suitable for suspending a pendant switch or tool due to a long cable and ratchet.
	Model Initial Max. tension N {kgf} with or without ratchet Cable travel(m) ER-3A 18 {1.8} with 3 ER-3B 18 {1.8} without ER-5A 25 {2.5} with ER-5B 25 {2.5} without ER-10A 49 {5.0} with 4 ER-10B 49 {5.0} without

The balancers specialized for air tool suspension

3 kind of model employ 3 kind of hose respectively.
They will play their active part with the particular features.
These models are combined with both the character of Hose reel and balancer
and will suit the suspension of an air tool.
They enable it to put the piping of hoses in order.

Air tool balancer

	This model is gathered the ability of hose reel and spring balancer. Using this balancer would make work places simpler.
	Model Capacity(kg) Cable travel(m) ATB-0 0.5 - 1.5 1.3 ATB-1 1.5 - 3.0 ATB-2 3.0 - 5.0 Inner dia. 6.3mm

Tool hose balancer

When the spring failure is happened, the fall prevention device will operate and stop the suspended tool / device. (Endo-Kogyo is the first balancer manufacture to equip this safety device in Japan) The inside diameter of hose is 8.5mm which supplies enough air to operate the suspended air tool / device. Comparing with the ATB series, using the THB series can apply with more various kinds of the air tools.

Model Capacity(kg) Cable travel(m) THB-15 0.5 - 1.5 1.3 THB-25 1.5 - 2.5 THB-35 2.5 - 3.5 THB-50 3.5 - 5.0 THB-65 5.0 - 6.5 Inner dia. 8.5mm

Air tool reel

	An included spring works to retract a hose into device automatically. A contained hose solves the short of air consumption for air tool owing to a large inner diameter of 10mm. A ratchet system applied for the device can keep a tool suspended at any position on the hose travel where you want.
	Model Initial Max. tension N {kgf} Cable travel(m) ATR-5 49 {5.0} 2 ATR-5-1 49 {5.0} Inner dia. 10mm